When my mom mentioned that she’d love a sign for her new house (see all of my #MomsLakeHouse posts to see the house progress!), I knew that I had to make one for her. Since we used white Hamptons Stikwood to clad the ceiling of their new master bedroom (that’s almost done!), I thought it would be fun to use some of the leftovers to make a wooden shiplap rustic farmhouse sign for my mom & dad. It was so enjoyable to make that I think I need to make one for our home soon, too! Here’s how to make your own rustic shiplap sign.
To make your own rustic wood shiplap sign, follow the directions below or watch the step-by-step video at the bottom of this post.
❤ 1/4″ plywood
❤ 1 x 2″ pine or spruce
❤ Cricut (or similar cutting machine): http://amzn.to/2ywa1uO
❤ Vinyl: http://amzn.to/2yUzHpj
❤ Transfer tape: http://amzn.to/2jjgRB8
❤ Mod Podge: http://amzn.to/2jmKVfm
❤ Grey chalk style paint (I used FAT paint, but here’s another option): http://amzn.to/2yzgLbh
❤ Foam brushes: http://amzn.to/2htZSf7
❤ Carbon grey stain: http://amzn.to/2yuWKTt
❤ Finish nailer: http://amzn.to/2zAjKUl
❤ Hamptons Stikwood: http://rstyle.me/~aaAzC
❤ Uitlity knife: http://amzn.to/2yuXbx5
First, cut a piece of 1/4″ plywood to the sign you’d like your sign to be (minus the frame). I decided to make this sign 48″ by 12″. Next cut some Stikwood pieces (sticky-backed thin barnwood – I used three pieces) to size and stick it to the plywood. If you don’t want to use Stikwood, you could use another piece of plywood cut into strips & painted to create this shiplap effect.
Use a Cricut machine to create a vinyl stencil with your desired saying. If you want to use this Bible verse like I did, you can go right here to use my design for free.
Apply transfer tape on top of your vinyl stencil, peel off the paper backing, and apply the vinyl stencil to your sign. Make sure to measure and mark you sign and stencil so that your design is centered.
Next, carefully peel the transfer tape off of your vinyl stencil. This can be a little tricky, so use tweezers or your fingernails to gently put things in place on your wood as needed.
If you’re using rough wood like I am, it’s a good idea to go over your stencil with Mod Podge first. This seals up any lifting that might be happening where the stencil meets the wood.
Once the Mod Podge is dry, go ahead and use a sponge brush & chalk style paint to paint over the stencil. I painted 2 thin coats on my sign.
Next, pull off your vinyl stencil to reveal your design. This is the BEST part!
Use tweezers to remove any small vinyl details from your sign.
To make your sign frame, measure the vertical sides of your sign and cut 2 pieces of 1 x 2″ pine or spruce to that length. Then, put the sides of the frame in place, and measure the horizontal side of your sign PLUS the side frame pieces. Cut 2 pieces of wood to that length.
Then, stain your frame pieces if desired, and when they’re dry, use a finishing nailer to nail them to your sign. I raised my sign up first with some scrap pieces of 1 x 2″ wood so that there was a lip at the back and front of my sign when I nailed on the frame.
If you desire, you can sand the lettering on your sign slightly to give it a weathered look.
And that’s it! Your beautiful farmhouse style sign is complete.
I really love how this turned out, and even though it looks so pretty on our own mantel, I can’t WAIT to share with you where it’s going to go in my mom’s lake house!
Watch the video tutorial below to learn how to build this rustic wooden shiplap sign:
Disclosure: This blog post contains affiliate links. When you purchase an item via these links, I receive a small commission at no extra cost to you.