Make a Scrap Fabric Banner to Tutu – A Two-in-One Tutorial

This post may contain affiliate links · This blog generates income via ads

DIY Easy Scrap Fabric Banner to Tutu - A Two-in-one tutorial!

We had the most fun Strawberry Shortcake birthday party a little over a week ago that I made a simple scrap fabric banner for. It was so very easy to make, and I constructed it with an idea in mind. I wanted to re-use it as a fun dress-up tutu for my daughter!

This is a really simple, quick DIY project that requires no sewing and little material. You could use the banner as party decor, and then  upcycle it into a scrappy fabric tutu when the party’s over. It will be Little C’s Valentine’s tutu!

Materials:

  • scrap fabric – enough to make about 30 strips that are about 2″ wide and 30″ long
  • scraps of ribbon or lace (optional)
  • 60″ length of 1/4 elastic
  • rotary cutter or scissors

Directions:

Easy DIY Scrap Fabric Banner to Tutu - A 2-in-1 tutorial!

Cut about 30 strips of fabric that measure 15″ – 30″ long. I liked the look of different lengths of strips, but you could also make them all the same length. You can also cut some lengths of ribbon or lace to add some texture to the banner / tutu. Cut a piece of 1/4″ elastic that’s about 60″ long.

Easy DIY Scrap Fabric Banner to Tutu - A 2-in-1 tutorial!

Starting about 2″ from one end, tie the strips to the elastic piece as shown above. Fold them in half with wrong sides together, and then turn the folded end over the elastic. Pull the other end through the loop created.

Easy DIY Scrap Fabric Banner to Tutu - A 2-in-1 tutorial!

Continue tying strips onto the elastic in this manner, leaving about 2″ between each strip as shown. Tie bits of lace or ribbon between the fabric strips if desired.

Your scrap fabric party banner is done and ready to hang! This would also make a fun decorative banner for a baby or child’s room.

Easy DIY Scrap Fabric Banner to Tutu - A 2-in-1 tutorial!

To “upcycle” the banner into a tutu, push all of the strips together as much as needed to match the circumference of your child’s waist (my daughter’s measurement was 20″).

Easy DIY Scrap Fabric Banner to Tutu - A 2-in-1 tutorial!

Cut the elastic to size. If you have a sewing machine, you can sew the ends together. If not, tie the elastic tightly together.

Easy DIY Scrap Fabric Banner to Tutu - A 2-in-1 tutorial!Easy DIY Scrap Fabric Banner to Tutu - A 2-in-1 tutorial!

Now you have an adorable scrap fabric tutu that’s perfect to twirl in!

5 Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.